(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. D

    9n lift arms

    Bought a set of Pats Easy Lift 3point lift attachments. His parts are sized for lift arms between 2 and 3 inches high. Mine are 1 3/4 which affects the mounting. Only one set of the 4 bolts that squeeze the lift arm hits the lift arm. The wedges with the roll pin hole are not thick enough to...
  2. D

    9n radius rod removal

    I am in the process of removing front end stuff prior to doing a front axle pin removal. I want to remove the radius arms at the front axle attachment point. The nut came off easily, but I can?t get the bolt to move. It seems to be really rusted in.i have tried PB blaster and tried moving the...
  3. D

    posting pictures

    How do I post a digital picture I have taken to this forum
  4. D

    9n starter 6volt

    thanks for the rapid input from you guys ! I took that info and some info from past posts on this site,and the starter is back working.I verified that the battery was OK and checked all terminals.Solenoid checked out OK also.Based on some old posts I decided to check if the starter had shorted...
  5. D

    9n starter 6volt

    My starter seems to have gone out.Just a little bumping sound when starter button pushed.When I jump across solenoid terminals i get same sound. Any tricks for replacing it. I have read that you don"t want to spin the starter before its mounted or the starter gear moves out on the bendix and...
  6. D

    8n no spark

    My neighbor has a front mount 8n.His motor quit running after it had been running Ok previous day. After checking things out he discovered no spark at plugs.His wire going to distrib. is hot. Any ideas where he should look?
  7. D

    9n ignition switch help

    Which site sells the most reliable ignition switch.I have read on this site that most are junk,and I agree completely.I"m getting about 6 months use B4 they start acting up.They aren"t failing due to weather or abuse,they just quit !!!
  8. D

    9n ignition switches

    Any opinions about the source of the best quality ignition switches?I've read comments on the Forum re poor quality ignition switches that are out there.I just had to replace a switch that was maybe 2 months old.Not sure what tractor parts site I got it from.
  9. D

    9n carb problems

    I have a 9n with an 8n front mount 6v motor.Motor running perfectly yesterday for a couple of hours bush hogging.Its always started and run fine.Started it this morning and it only wants to keep running if choke pulled out.4 gals. fuel added yesterday at end of day.Thats the only change from...
  10. D

    9n on cover of new N-news mag.

    Nice pic. of a 9n on the cover of the new Spring issue of N-news.One thing I noticed right away was the flexible fuel line that appears to be sitting on the exhaust manifold.Big fire read to happen??
  11. D

    9n hood side panels

    I have the hood side panels with the dimpled holes at the bottom for attaching to the front axle support.Its just the side panel with a hole in it and the axle support with a hole in it.I have a service manual that shows a Part# 8434 that is part of the attachment down there?Do I just bolt...
  12. D

    9n foot rests

    Does anyone have any pictures of what the stock 9n foot rests look like? This site sells foot rests that they say are for 9n,2n.My existing rests are some sort of homemade diamond plate that is welded to the peg coming off the rear attachment for the radius arms.The rear support for the foot...
  13. D

    9n tires

    What was the purpose of those cute old-time looking narrow tires on 9ns?My 9n came with regular width car type tires.I am considering converting back to the original look.Would I be doing it mostly for looks,or is there an actual purpose for those narrow tires?
  14. D

    9n exhaust pipe bracket

    I bought a one piece horizontal exhaust pipe/muffler and rear exhaust pipe bracket from this site.What does the bracket bolt to?My old pipe was supported in the rear by some plumber steel pipe support tape attached to one of the bolts from the round inspection plate.The correct bracket looks...
  15. D

    good source for battery cables

    custombatterycables.com I got replacement battery cables for my 6v 9n from these folks.You order on-line and can customize everything.He also sells + and - battery terminals.I had no idea they are a different size.Auto parts stores sell cables with one size sort of fits all terminals.He also...
  16. D

    9n fuel tank fuel line

    Couple of questions for all you experts.I am reinstalling my fuel tank and I am wondering if at the 3 bolted mounting points there is supposed to be a rubber pad,or is it just metal to metal?Second question is about the all metal fuel line.In order to avoid alignment issues after remounting the...
  17. D

    6v generator

    My 6v generator only has a single post.What have i got here?Most of the manuals seem to discuss multi-post generators.Even my Ford parts book only shows multi-post.Its working fine,just for my own info.My motor is a front distrib. 8n in a 9n tractor.
  18. D

    9n unvented fuel caps

    The vent in my tank is plugged so I don't get proper fuel flow since I have an unvented fuel cap.Fuel will actually stop flowing from tank.Rather than take tank loose to open up the vent,why not just buy a vented cap?
  19. D

    9n tie rod end rehab

    My tie rods are the style that only one end has a threaded adjustable tie rod end.The rods are fine.I just want to replace the tie rod ends.What parts do i get from this website parts section to do this little project.
  20. D

    9n spark plug wires

    Anyone have any pictures of how the spark plug wires were supported coming off the front mount distributers?I end up using cable ties to keep them away from the fan belt.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top