(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. K

    Case 300 distributor

    I am trying to figure out what brand of distributor I have on my 300 round nose 12v. AI (Artificial ignorance) says you can tell by using a magnet. The base of an autolite is aluminum Delco, iron. A magnet sticks to mine. What it also says but gets wrong is that both have a rectangular I D...
  2. K

    Vo vs vAO

    Does anybody know if the v and early va sheetmetal interchange on the orchard model?
  3. K

    Case 602 cutter shaft

    I need to replace the front u-joint on my Case 602 cutter. Could have posted on the implement site, but it is Case and you guys are the best. I cannot get the shaft apart to work on the u-joint. One picture shows how the shaft tubes are in front. I assumed they slid at that junction but they...
  4. K

    ford 2000 3cyl red paint

    The 3000 we are working on seems to have red paint on the back half of the tractor. I know this was after the red era, but the red seems to be the bottom coat. Just wondering if they were still red in Europe or what might be the deal. Did ford use a red primer? No evidence of red on the front...
    • kenbob
    • Thread
    • Replies: 1
    • Forum: Ford
  5. K

    ford 3000 3cyl issues

    My cousin asked me to help a church member of his to get her grandpa's tractors running. The first one we tackled was a ford 3000 3cyl. I have the 2000 version so am pretty familiar with it. THe tractor had plenty of issues. The only test equipment we had was an inline spark plug light and a...
    • kenbob
    • Thread
    • Replies: 6
    • Forum: Ford
  6. K

    foord 2000 exhaust wobble

    I noticed my 2000 ford 3cy gas exhaust pipe wobbles a little bit. I tried to tighten it and it doesn't seem to be loose. I have not removed sheet metal yet to see what is going on. Is it normal for them to wobble a little? Thanks all.
    • kenbob
    • Thread
    • Replies: 2
    • Forum: Ford
  7. K

    fyi ford 2000 generator

    I added this to an old post but not sure anyone would see it. If you have a ford 2000 with 12v lucas generator and need new springs, there are 2 kinds. Round coils is what the parts book says, but mine had no identifying markings and had flat clock spring type springs. I figured it out it ws...
    • kenbob
    • Thread
    • Replies: 0
    • Forum: Ford
  8. K

    2000 3cyl generator springs

    A brush broke on my 72 ford 2000 3cyl gas generator. Got new brushes and then broke the spring putting it together. I am having trouble figuring out which spring to order. AI says the Lucas generator is 22756....I found one set of springs supposedly for that model but they are wound wire...
    • kenbob
    • Thread
    • Replies: 5
    • Forum: Ford
  9. K

    300 top link pin bracket

    I busted the bracket that attaches to the tractor and holds the thick top link pin on my 300 round nose. THe number on the casting is g1050. It is held on with 4 bolts. I would guess they aren't availible new. Does anyone have used? I suppose I should buy 2 as if one breaks the other...
  10. K

    selling

    I put my oliver 550 up for sale on yt marketplace
  11. K

    ford 2000 3cyl generator light

    When I started my 2000 3cyl gas today the generator ligth did not go out. It is full bright the best I can determine. I watched the Rachael Gingal you tube on the charging system. My battery is charged by the tractor and had 12v remaining when i tested with a multimeter. It did NOT go up after...
    • kenbob
    • Thread
    • Replies: 8
    • Forum: Ford
  12. K

    Snapper motor replacement

    I have a snapper rider 26" cut, the type with gas tank mounted right behind the seat. It came with a 12.5 intek motor which is shot. Doesn't seem like that motor is availible. There is a 10hp no electric start which I know will fit . Prefer electric start but those motors are all more hp...
  13. K

    Case 311 pan drop

    I probably will do an overhaul on my 311 this winter. Any tricks or suggestions on dropping that steering gear that is in the way on a wide front. Doing in tractor work, but I don't see anyway the pan comes off without major work.
  14. K

    Oliver mower

    There is a 3pt oliver sickle bar mower for sale near me. I have never even seen one before. Did Oliver make their own or was it built by another company.
  15. K

    Case 311 generator

    I know I have a problem with my 311 keeping the battery charged. I have a multimeter but not a pro at using it. To test the generator do I just test across the 2 terminals, or a terminal and a ground. Pretty tight working around all that sheet metal. I can't really see which terminal is...
  16. K

    Case cutter u joint

    THe u joints in my case 603 cutter are starting to rattle. I found the part number 1963CHE. I have not done ujoints before. If I take out the old will I be able to take to an auto parts store and find a replacement based on any numbers on the old u joint? OR is there a cross reference for...
  17. K

    Seed drill for beets

    I plant a lot of garden beets. Some pelletized seeds, some not. Some barely bigger than a sorgum seed and some almost as big as a soybean. I always struggle with my Missouri clay and wonder if any of the Van brunt or superior seed drills so often for sale work with beet seeds. I have never...
  18. K

    550 shifter--again

    I am in the same boat as dmsimmons as far as tractor stuck in gear. I have reverse only. Any other position and the tractor dies--no neutral. I read the posts about pulling the shifter out and lining up the 3 rails. 2 are in line. One is not and I have moved it some, but still not in line with...
  19. K

    fyi

    My 550 came with a 30lb aftermarket oil pressure gauge. WHo ever put it on, didn't bother to cut the tube to length--they just curled it up. I knew there must be some loss of pressure to the gauge with that much tube, but was surprised when I took out 2' of line, cold idle went from 12 lbs to...
  20. K

    Olliver 550 throttle

    I have my 550 back together and running thanks to a lot of help from this site. I have a question on the throttle. If I pull it all the way down i can get 20-2100 rpms, (cheap electronic gauge), but if I take my hand off the throttle it rotates back to about 1500 rpm. That is handy as it is pto...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top