(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. P

    550 haybine advice

    I won't have to worry the issue now. The haybine sold today while I was hauling a 430 home. It seems it was not meant to be. :)
  2. P

    550 haybine advice

    I've been searching for a Case haybine to use on my farm. Tonight I looked at a 550 which came for sale locally. I know this is the pioneer model of Case/Hesston, and viewed as less desirable than the 555. The positives I noted on this machine were no breaks or welds, no dents and collision...
  3. P

    power steering booster cylinder bushing

    On the power steering system used for early 430 utility models (and others) with a booster cylinder, the shaft mount bushings are Case #A35654, priced approximately $17-18 each currently. As this design looks quite alike that used on 1955-64 Chevrolet, do any of you know if the bushings are the...
  4. P

    230 baler timing

    This past Summer I bought a 230 baler, for sale in the local area and priced close to scrap value. My original intent was to keep some pieces for spares and part the rest. After looking into it more thoroughly and freeing up the machine, I may keep it for a second complete baler. The problem...
  5. P

    Case 65 pull type combine

    According to the book, 150 years of J.I. Case by C.H. Wendel, the model 65 was built 1957-58. It is a 6 foot cut with 28" cylinder, available as P.T.O. drive or with a Wisconsin V-4. I would guess that auger parts are shared with some other Case combines of the era.
  6. P

    281 rake

    Thanks for the lead, Jim. Unfortunately, the 200 is a different and earlier model and does not seem to share common parts with a 281.
  7. P

    281 rake

    I bought this rake to expand my line of Case machinery on the farm. From everything I can glean, I believe its a model 281. It looks like I'll need to replace bearings in the gearbox and also do a major overhaul to the wheel hubs. As CNH parts site does not show the parts diagram, can one of...
  8. P

    230 baler repair

    John, I have to agree it may be my least favorite feature of the baler. This is speculation, but perhaps the Case baler designers of the day were going after a simple and light design overall for the 200 series. I have read the Case 200-230 are some of the lightest small square units. Maybe...
  9. P

    230 baler repair

    Larry, your baler looks to be in great condition. I cannot imagine what motivates a man to discard that slip clutch guard, but the parts 230 I bought is also missing it.
  10. P

    230 baler repair

    Have any of you with a 200, 220, or 230 baler had to disassemble your machine to repair the feeder arm mount? Three of the four brackets were cracked through and had to be welded. I wondered if this was a known issue on these balers, and only a few days ago another 230 appeared for sale...
  11. P

    Hydraulic filter , front end loader ID help

    Yes, that looks like it could hold a filter behind the plate.
  12. P

    Hydraulic filter , front end loader ID help

    Its not an Ag style loader such as the model 191, but some derivative of a Case industrial loader.
  13. P

    Case 570 tractor questions

    Thanks for filling in the details I forgot, cnt. It was late when I wrote my first reply. I hadn't even considered that the std. PTO could be had on some 570's, which as you mention probably would be only 4 speed models. I suppose there are a few with no PTO, like is common on many...
  14. P

    Case 570 tractor questions

    The 570 series is nearly identical to the earlier 530 (1960-1969). The std. transmission is the 4 speed, the 8 speed is the same with a dual range added, and the shuttle is the 8 speed with shuttle added. The shuttle transmission is super handy with loaders, but probably not such a benefit for...
  15. P

    Turkey Day

  16. P

    430 3-point lift links

    As seen in the photo, my 430 utility is missing the correct lift links for the three point arms. What is the proper interchange? I suspect it is 430 and 530 from the time of draft-o-matic through production end, 470 and 570, and 480CK/580CK. Is that correct? Do any of you have used ones...
  17. P

    late 430 power steering

    Thank you, Chuck. The steering cylinders were rebuilt by the previous owner, but a small leak at the reservoir gasket is the reason for removal. I will service the filter at the same time.
  18. P

    late 430 power steering

    This is a photo of my 1969 430 utility model. Is it necessary to remove the distributor to take off the power steering reservoir and filter or will it just sneak by once the end bolt is removed?
  19. P

    430 hood

    The hood on the 430 series has a brace tie-bar that attaches mid-way, between the fuel tank and engine. Do one of you have the measurement of this piece? I believe I could make one if I knew the dimensions. Thank you
  20. P

    Here is my 411b

    The sheet metal is pretty straight. It looks like the tractor wasn't abused other than being left outside. To repolarize the generator (preferably before you run it) because it is a positive ground system, run a wire from the negative battery post to the A terminal of the generator and...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top