(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. C

    7140 not running up to power part of the time

    If it starts right off and stays running then it will probably be alright .IF it starts then stops when you let go of the key it will show a buch of numbers on the screen in the dash and stops each time it is started when key is released. IF I ties the shut off solenoid back with a string it...
  2. C

    Yanmar YM146

    Whats the good bad and ugly about them and that model. Looking at one no mower deck so would be just a get around for hauling tools to work on things rather than using the pickup.
  3. C

    yanmar YM 146

    Looking at a Yanmar YM146 diesel. Is there anything in particular to look for or has problems with I should consider not wanting it. Thanks
  4. C

    fuel tank thickness

    Do any of you guy have your tanks checked for thickness as they age so they don't go to leaking before the leak starts. Reason for asking is one of our tanks dad told me grandpa got when he was about 8 years old and he's now 92. So that tank is 84 years old or so. This all leads to talking to my...
  5. C

    110 plug female

    I need a 110 plug configuration for about 25-30. amps. The Ac unit in the window has a molded plug on it of that style with about a 10or12 gag wire on it. Pg on cord /pigtail is fine plugs on the cord to it keep burning out the inside with these cheesy cheap 110 volt plugs I can get. One of the...
  6. C

    bolts for hydraulic pump.

    I need the size and length of the bolts that hold the 2 pumps together on a 9610 combine with the planetary drives. Deere does not or will not tell me in the parts for it on Deeres parts website. And if I go into my Deere dealer they can not hardly find the pumps let alone find the bolts. they...
  7. C

    lawn mower coil.

    I believe I need a coil for the lawn mower. No spark and no spar with kill wire disconnected. With an Ohm Meter I get about 1500ohms from the end of the plug wire where the plug would attach to the base of the coil and to the kill wire connection but an open circuit or no reading across the base...
  8. C

    Matador sprayer residue on corn

    I need to spray some corn and was looking to find out if I didn't wash the srpayer out before going to corn if the little bit left in the booms and tank line would be a problem if it was mixed into a tank of corn spray like Atrazine,Capreno and Round up. IT would be less than 5 gallon mixed in...
  9. C

    7140 head lights

    You will need to read the complete post before replying. How do you get the bulb out on the corner light for the 7140 and can I get an LED replacement for it. The regular front light with the high low beam can be had in LED . I already looked at the Fiat cartoons and it is pretty vague on...
  10. C

    Arching trailer frames. Jim you were explaining how trailer frames were arched at Obrecht trailer in the O/A welding topic.

    I thought I would start a new topic on this rather than muttle up the other with it. So when you heated the frames then quenched with water didnt that make the frame brittle from the water quench? Could you use oil for the quench or does it not cool it fast enough to get the shrinkage like water...
  11. C

    Chainsaw

    I think I need a coil for my MS290 saw. I was sawing the other day and it died/ran out of fuel. It was out or close to it on fuel so filled it back up. Have not been able to start it since. Used the other saw to finish up that day. IT would not spark when I tried it so disconnected the kill wire...
  12. C

    field cultivators

    Been looking at a different field cultivator and seems most don't list the spacing on the shanks. I like the 7 inch better for levelness.
  13. C

    Tire irons

    Looking for a couple longer tire irons for prying big and heavy tires off with. I already have a couple of Ken tool bars, 2 spoons and demounting bar similar to the 34649. Which is one of the bars I'm looking at. The one I have similar to it is only 37 inch and 3/4 bar size .The bigger one is 52...
  14. C

    what couplers do you guys use for air hoses and hydraulic connections?

    Like the Regular pioneer couplers for most hydraulic connections though I like to be able to couple them under pressure. Since if they set out during season the sun can make the pressure build just enough they will not go together without letting it off. The reason for being able to couple them...
  15. C

    Metric nut sizes

    I find myself needing more metric combination wrenches than I already have. I guess I'm looking for sizes that will not likely ever be used like the 25/32 socket in a set. I have a pretty complete set of metric combination wrenches from about 13MM to 20MM then the 24,30and32 MM want to fill in...
  16. C

    Soy bean planter for next year.

    Looking at next year already was wondering what some might think about how to put an end transport on a 6000 series white planter for shed storage. This is a 3pt mounted planter with no rear lift assist wheels. I do have a tool cart type of way to lift it in the field during planting. Was...
  17. C

    Dodge Dakota 1994 with 3.9 V-6 engine

    Running spews water out the over flow at the surplus tank. Temp gage in middle of range so would not think it is hot and certainly not cold. Continues to spew after shutoff. I'm thinking heads or gaskets. It has gotten hot a couple times once when the fan belt broke after ac compressor locked up...
  18. C

    PTO shield parts.

    It seems I need some pieces for the spinning shield on a couple PTO's one has just the plastic halves that slip in through the slotted hole after the shield is in place and the other has something different. I'm also having trouble with the release bals in a 1219 mower after 35-40 years...
  19. C

    Chem farm

    I'm thinking of going back to incorporating some spray for beans. And wondered if Chem Farm was still in business or not. Don't seem to show up in a search, and Read that Great Plains bought them out. Or something like that. Thinking I would like to put a set of nozzles on the front of a...
  20. C

    12volt sprayer pumps.

    Are those 12volt sprayer pumps fixable or just junk it and replace with a new one. IT was working earlier this spring and a week ago or so I wanted to spray some fence row brush and it would not work motor runs but no product comes out the end of the hose or spray wand. No plugged strainer and...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top